Bearing Chock

The bearing seat is an important part of the fixed bearing and ball mill, which mainly carries the entire weight and impact force of the cylinder, and plays the role of a support in the entire bearing component. Where there is a bearing, there must be a support point, the inner support point of the bearing is the shaft, and the external support is the bearing seat that is often said. Its quality directly affects the production efficiency of the ball mill and the operation safety of the equipment.

The bearing housing is operated for a long time in an environment with low speed and heavy load accompanied by impact, so it must have high strength and wear resistance, and require certain shock absorption performance.

The operating temperature is low, and the power saving effect is good

Thin oil lubricating oil is used for the lubrication of the bearing seat, so that the friction coefficient of the bearing is reduced to a small value, the power saving effect is good, and the temperature of the normal operation of the bearing is much lower than that of the dry oil lubricated bearing, which prolongs the service life of the bearing.

It is equipped with an oil mark to reduce maintenance costs

The lower seat of the bearing is equipped with an oil level observation oil mark, and the operation function can see the oil level at any time, which can replenish the oil volume in time, prevent poor lubrication due to lack of oil, and avoid the occurrence of bearing damage accidents.

The structure is reasonable and the environmental protection effect is good

Remove the outer top sleeve of a compressed bearing to prevent dust from entering the bearing box, maintain good oil quality, ensure the service life of the bearing, and operate safely and reliably.