Буровой завод

Les barres de forage, ou drill rods en anglais, jouent un rôle crucial dans l'industrie de l'exploration minière et pétrolière. Elles constituent un élément essentiel des équipements de forage, permettant de percer le sol et d'atteindre les profondeurs nécessaires pour explorer les ressources naturelles. Dans cet article, nous examinerons les différents types de barres de forage, leurs matériaux, ainsi que leur importance et leur application dans l'industrie.


...
Буровой завод2025-08-15 05:00
876


(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

...
Буровой завод2025-08-15 03:23
1781

  • In the bustling market of automotive accessories, spark plugs hold a critical position. As the tiny yet mighty conductor of electricity that ignites the combustion in your car’s engine, selecting the right spark plug is paramount for performance and efficiency. Today, with a plethora of options available, 'Spark Plugs for Sale' has become a buzzing topic among gearheads and do-it-yourselfers alike.
  • The shaft must not have any sharp edges. If necessary, have the edges removed by a specialist.
  • J

  • Oil seals are an essential component of many industrial machines and equipment. They play a crucial role in preventing oil leaks, protecting bearings and other crucial parts from contamination, and ensuring the overall smooth operation of the machinery. One popular and widely-used size of oil seal is the 75x100x10 model.


  • Maintaining spark plugs is an essential aspect of routine auto care. Over time, deposits can build up around the electrodes, inhibiting their ability to generate a strong spark. Regular checks and replacements when necessary help maintain optimal engine performance and reduce the risk of unplanned breakdowns.
  • Spark plugs like the 794 000 play a pivotal role in the operation of a spark-ignition engine. They initiate the combustion process by generating a spark that ignites the air-fuel mixture in the combustion chamber They initiate the combustion process by generating a spark that ignites the air-fuel mixture in the combustion chamber They initiate the combustion process by generating a spark that ignites the air-fuel mixture in the combustion chamber They initiate the combustion process by generating a spark that ignites the air-fuel mixture in the combustion chamber794 000 spark plug. A properly functioning spark plug ensures a smooth, efficient burn, translating into better fuel economy, reduced emissions, and increased engine power.

  • What are Oil Seals and the different types?

  • The minor lip prevents the entry of dust and contaminants from outside.
    Lubricant can be retained in the space between the main lip and the minor lip.
  • • Lip radial load
    • Lubricating oil
    • Rotational speed
    • Shaft diameter, etc.
  • The manufacturing process of molded gaskets typically involves the following steps
  • In the world of agricultural machinery, the rotavator, also known as a tiller, is an indispensable tool for soil preparation. It helps break up and loosen the soil, making it ready for planting. However, the efficient functioning of this equipment heavily relies on a critical component - the oil seal.

  • ERIKS also supplies the types GR and GRST. These are virtually identical to the types R and RST, except in this case the metal inner ring is also completely encased in rubber. ERIKS uses FKM rubber here as standard, so these seals are ideal for use in acidic environments.

  • In addition to their performance benefits, LS1 spark plugs also contribute to improved fuel economy. By ensuring a more complete combustion process, these spark plugs help reduce the amount of fuel needed to achieve the desired level of power, resulting in lower fuel consumption and reduced emissions.
  • Oil Seal Price Factors and Trends
  • Other maintenance factors, such as insufficient lubrication inside the engine.
  • One of the most common issues that arise with the m20 valve cover gasket is leaks. Over time, the gasket can deteriorate due to heat, pressure, and exposure to oil. When this happens, oil can seep out of the valve cover, leading to oil leaks and potential damage to the engine if not addressed promptly.

  • ERIKS type M (type B according to the DIN standard) has a single metal casing and rubber sealing lip. Since the casing is made of metal, it must be fitted in a well-finished, undamaged groove. Large volumes of oil seals with metal casings are often cheaper, which is why they are often used as original equipment in machines. However, if an oil seal has to be replaced, types with a rubber exterior (type R or RST) are easier to fit. Type MST is similar to M and commonly used. The difference is the dust lip in the MST oil seal that prevents dust and dirt reaching the sealing lip, and extends its service life in dusty environments.

  •  

  • In the intricate world of mechanical engineering, oil seals play an indispensable role in ensuring the efficient and safe operation of various machines. The 40x52x7 oil seal, in particular, stands as a testament to the precision and importance of these seemingly small yet vital components.

  • Gasket Valve Cover: Selecting Quality Components

  • It has good compression set properties 
  •  
  • One of the key benefits of using the A7RTC spark plug is its ability to improve fuel efficiency. By providing a strong and consistent spark for ignition, this spark plug helps to ensure that the fuel in your engine is burned efficiently, resulting in improved fuel economy. This can help you save money on fuel costs and reduce your carbon footprint.