jaw crusher parts

  • Due to the machine's working environment being prone to intense vibrations and impacts, constantly observe the dynamics of various parts during operation. If you detect abnormal noise or other irregularities, shut down the machine immediately for inspection and repair before resuming operation. If hydraulic system connectors leak or components become loose, shut down the machine for adjustment and tightening. After ensuring everything is normal, you can resume operation. Before completing each shift, lower the hydraulic hammer to the lowest position and retract all other hydraulic cylinders to their shortest length. If moving a distance, keep the mast leaning backward. For the machine's components, accessories, and electrical equipment, perform regular inspections, especially the connections in the wiring of the motor. During operation, there should be designated personnel for guidance. The guide and the operator should check signals with each other before work and cooperate closely. At the start, use a bell or other methods to signal and inform surrounding personnel to move away. The machine should start at a low speed and gradually accelerate to high speed.

    • ...
    jaw crusher parts2025-08-14 19:51
    74

    Furthermore, environmental sustainability has become a primary focus for energy companies amidst growing concerns about climate change. The 3 32 specification should also consider the impact of perforation methods on surrounding ecosystems. Employing precise and industry-accepted standards allows companies to conduct their activities with minimal disruption to the environment, preserving biodiversity and reducing the carbon footprint of drilling operations.


    ...
    jaw crusher parts2025-08-14 19:45
    1055

    1. Высокая производительность Основное преимущество таких компрессоров – это их способность обеспечивать огромное количество сжатого воздуха, что критично для работы мощных пневматических инструментов. Это делает их идеальными для крупных строительных проектов или производственных процессов, где требуется непрерывный поток воздуха.


    ...
    jaw crusher parts2025-08-14 18:50
    338

  • 1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.

    • ...
    jaw crusher parts2025-08-14 18:27
    1708