디젤 공기 압축기란?

Slurry pump will be found in the use of the process of blockage, so how do we deal with this problem, many customers think that this is a more complex problem, but if the blockage problem is not handled well, it will cause damage to the equipment, which will also affect the efficiency of use.

Manufacturers of self-priming slurry pump solutions offer customized solutions tailored to the specific needs of industries. Whether it's high-flow applications, corrosive environments, or heavy-duty operations, these pumps can be customized to meet the unique requirements of each industry.

2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.

디젤 공기 압축기(90 CFM)는 그 효율성과 내구성 덕분에 다양한 분야에서 널리 사용되고 있습니다. 특히 건설, 농업, 자동차 정비 등 여러 산업에서 중요한 역할을 하고 있으며, 작업의 효율성을 높이는 데 큰 기여를 하고 있습니다. 따라서 적절한 관리와 유지보수를 통해 이 장비를 최대한 활용하는 것이 중요합니다. 디젤 공기 압축기는 앞으로도 지속적으로 많은 산업 현장에서 없어서는 안 될 장비로 자리매김할 것입니다.

1. Centrifugal Pumps These are the most widely used pumps for slurry applications due to their simple design and efficiency. They operate by using a rotating impeller to increase the velocity of the slurry, which then converts kinetic energy into pressure energy. Centrifugal pumps are suitable for low to medium viscosity slurries and are particularly efficient for transporting large volumes at lower pressures.

Before delving into calculations, it's key to understand how a mud pump operates. Most modern drilling rigs use either triplex or duplex pumps, which use a series of pistons to create pressure. The fluid is drawn into the pump from a storage tank and pumped down the drill string. After reaching the drill bit, the mud carries cuttings back up to the surface through the annulus (the space between the drill string and the wellbore).

What is a Fractional Head Hammer?

The pile driver should pay attention to the following points during the piling process to avoid accidents: