Key Parameters for Calculation
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.
In today’s world, environmental sustainability is a paramount concern. The Slurry Pump Blade Factory is at the forefront of integrating eco-friendly practices into its manufacturing processes. The factory implements energy-efficient technologies and recycles materials wherever possible, reducing its carbon footprint. Furthermore, the pumps produced are designed to minimize energy consumption during operation, contributing to lower greenhouse gas emissions in various industrial applications.
1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
Post-processing of large castings, large foundry processing manufacturers can use liquid sandblasting to clean the oxide scale and residue on the surface of the casting, which can not only remove impurities, but also play a role in polishing and improving the surface finish of the casting; Use grinding wheels, abrasive cloths, sandpaper and other abrasives to remove impurities such as burrs, protrusions and oxide scales on the surface of steel castings, so that the surface is smooth. In addition, methods such as mechanical, electrochemical and chemical polishing can further improve the gloss and corrosion resistance of castings.
Recent advancements include the development of smart slurry pumps equipped with sensors that monitor pump performance in real-time. These sensors can provide data on flow rates, pressure levels, and wear patterns, allowing for predictive maintenance and minimizing unexpected failures. Moreover, advances in materials science have led to the creation of more resilient pump components, extending service life and reducing the frequency of replacements.
Benefits of Using the CFM 185 Air Compressor
The Benefits of 185 CFM Air Compressors
