tâches de forage
The applications of the ZJ slurry pump are vast and varied. In the mining sector, it is extensively used for transporting mineral slurries and managing tailings. Similarly, in the construction industry, it plays a vital role in moving cement and other aggregates. Water treatment facilities also utilize ZJ pumps for sludge transfer, managing the critical process of waste management effectively.
1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.
Before delving into calculations, it's key to understand how a mud pump operates. Most modern drilling rigs use either triplex or duplex pumps, which use a series of pistons to create pressure. The fluid is drawn into the pump from a storage tank and pumped down the drill string. After reaching the drill bit, the mud carries cuttings back up to the surface through the annulus (the space between the drill string and the wellbore).
Characteristics of 20mm Drill Rods
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high