(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.

2. Portability and Convenience Their compact design and mobility make 185% compressors easy to relocate as work progresses. Construction jobs often require equipment to move from one area to another, and these compressors are built with this flexibility in mind.

4. Flute Design The flute or cavity of the spiral drill bit is designed to efficiently remove debris and chips generated during the drilling process. This feature helps to prevent clogging, which can slow down the operation and affect the quality of the finished hole.

In addition, collaboration and partnerships between companies in the energy and technology sectors are becoming more common. These alliances foster innovation and lead to the development of advanced directed drilling systems that can adapt to varying geological conditions, further advancing the industry's capabilities.

Additionally, the tools and technologies used on Mars will have to be adapted. For example, engines that rely on combustion would be less efficient in Mars’ thin atmosphere, requiring alternative propulsion methods. Moreover, the presence of carbon dioxide could be harnessed for in-situ resource utilization, converting CO2 into oxygen for breathing and fuel.

The Benefits of 185 CFM Air Compressors

Cleaning method:
Fill the pump with water
Content introduction
Problem: pump does not water, pressure gauge and true empty meter pointer beat violently.