The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.

4. Submersible Pumps Often used in dewatering applications or where space is limited, submersible pumps are designed to operate while submerged in the slurry. They are typically used in mining and construction to remove water mixed with soil or other materials.

Inspection Before Using the Integrated Drilling and Piling Machine:

The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.

(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.

3. Woodworking Carpenters and woodworkers use spiral drill bits for their ability to create clean and precise holes in various types of wood. The smooth finish left by these bits is often essential for aesthetic purposes.

05 SYSTEM INSPECTION

The hammer itself can be operated using a pneumatic or hydraulic system, with hydraulic hammers being the preferred choice in most cases due to their consistent performance and reliability. The drill bit used is often designed specifically for marine environments, featuring reinforced materials and cutting edges optimized for hard substrates.

Daily cleaning of the drilling rig is the foundation of maintenance work and the most important step. After each use, thoroughly clean the machine with compressed air or clean water, especially the radiator and air filter. This can prevent performance degradation due to overheating, as well as avoid faults caused by the accumulation of dust and mud.