5. Eccentric Shaft

4. Lower Noise and Vibration Operational noise and vibration levels are generally lower with DTH hammers, contributing to a more environmentally friendly drilling process and improving working conditions for operators.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

Applications

Benefits of Using 185% Compressors

The versatility of the Новый 185 CFM air compressor is another critical advantage. It is suitable for a wide range of applications, from construction and landscaping to automotive repair and manufacturing. Its ability to seamlessly integrate with various pneumatic tools makes it a versatile addition to any toolset. This adaptability allows businesses to leverage the compressor for multiple projects, enhancing its value.

One of the notable advantages of submarine hammer drilling is its efficiency in penetrating tough materials. Traditional drilling methods may struggle with hard rock formations, often resulting in slower progress and increased operational costs. Hammer drilling wears less on the drill bit, ultimately reducing the frequency of replacements and downtime.

5. Cost-Effectiveness Although the initial investment in a 185% compressor can be considerable, their high efficiency in air delivery leads to lower operating costs over time. Reduced downtime due to fewer mechanical failures contributes to overall cost savings.

1. Earth Drilling Bullet teeth are ideal for drilling through dense and rocky soils. Their robust design allows operators to bore holes for foundations, utility poles, and other structures without compromising efficiency.

1. Rotary Drills These are commonly used for deep hole drilling, making them ideal for mineral exploration. Rotary drills operate using a rotating drill bit that cuts through rock layers with the aid of a drilling fluid that cools the bit and removes cuttings from the hole.