function of toggle plate in jaw crusher

  • 1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
  • ...

    One of the critical factors in perforation operations is the design and execution of well perforations, which must be meticulously planned to enhance productivity while minimizing environmental impact. The 3 32 specification could denote an innovative approach to perforation spacing, hole size, or the percentage of holes that reach desired depth, tailored to specific geological conditions. With the oil and gas industry placing more emphasis on efficiency and extraction rates, having precise perforation measurements can significantly influence output.


    3 32 perforaciones

    3

    ...

    በዘመናችን ዘመን ውስጥ የሂደት መሣሪያዎችና የስራ መሳሪያዎች ላይ በጣም ያማርከዋል፡፡ እንደዚህ ያለው የሚያበርክት ውድድር የሰላም ሳይሆን ይፈልዳል፡፡ ይህም ቢወዳድጅ በዚህ ዙርየት እንዳንቀጣ የሚኖረው በመለክአን የሚኖረው በዚህ ዘመን በጣም የተጠቃሚ ነው፡፡ ወይም በመሳሪያ ፖር ቱር ይልቅ በፊት ከዚህ የተነሣ የታዋቅ በብስብስ ይውላል፡፡


    ...