pump shaft material stainless steel

En conclusion, les barres de forage, bien que souvent sous-estimées, sont des composants essentiels pour l'industrie minière et pétrolière. Leur conception et leur fabrication nécessitent des connaissances approfondies des matériaux et des conditions de travail. Que ce soit en acier au carbone ou en acier inoxydable, les barres de forage sont cruciales pour assurer des opérations de forage efficaces, sûres et rentables. À mesure que l'industrie évolue avec des technologies de pointe, il est essentiel de continuer à innover dans le domaine des matériaux utilisés pour les barres de forage, afin de répondre aux défis futurs d'une exploration toujours plus profonde.


...

  • 1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
  • ...

    Jaw plates are commonly made from manganese steel, an alloy that boasts high wear resistance and toughness. Manganese steel typically contains between 11% to 14% manganese, which contributes to its unique and advantageous properties. The addition of manganese enhances the alloy's hardenability, allowing it to become exceptionally hard when subjected to heavy impacts. This characteristic makes manganese steel an ideal choice for high-stress applications, such as crushing abrasive materials in mining.


    ...