Advantages of Using 20mm Drill Rods

- Geothermal Energy The ability to create deep, straight boreholes makes DTH drilling an excellent choice for geothermal energy projects, allowing reliable access to thermal resources.

Understanding the Importance of the 3 32 Perforaciones in Modern Drilling Applications

3. DTH Drills (Down-The-Hole Drills) These drills are known for their efficiency in drilling deep holes in hard rock. They feature a hammer located directly on the drill bit, which creates high-frequency impacts, breaking rock more effectively.

(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.

The evolution of drilling machines and technology has had a profound impact on mining. Modern drilling machines are equipped with advanced features such as automated control systems, GPS, and real-time monitoring tools that enhance precision and reduce human error. These innovations not only lead to safer drilling operations but also optimize the overall drilling process, reducing costs and time significantly.

1.How it Works:
Progressive cavity pump slurry operates on the principle of positive displacement, where a rotor turns inside a stator, creating cavities that move the fluid through the pump. This design allows for a smooth and consistent flow of the slurry, making it ideal for challenging industrial applications.

3. Size Variety Spiral drill bits come in a range of sizes to accommodate different drilling needs. From small bits used for precision drilling to larger ones for heavy-duty applications, this versatility makes them suitable for various tasks.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

3. Reduced Hole Deviation DTH hammers produce straighter holes compared to rotary drilling tools. This precision reduces the need for corrective drilling, saving time and resources.