It's also worth noting that even prior to the EU decision, France had already outlawed titanium dioxide in food back in January 2020.

What Is Titanium Dioxide?
Titanium dioxide, also called titania, is an odorless white powder and naturally occurring mineral that is widely used as a pigment for its brightness and whitening effects on a variety of materials, such as paint, plastic, paper, cosmetics, sunscreens, toothpastes and foods.
It’s produced through the sulfate or chloride process, which both involve treating titanium ore with sulfuric or hydrochloric acid to produce titanium sulfate or titanium chloride. These materials are then further processed to remove impurities and produce titanium dioxide in its final form.
Food-grade titanium dioxide differs from what’s added to plastics and paints to enhance whiteness. However, there have been concerns about the environmental impact of titanium dioxide production and the potential health risks from exposure to its particles.
Although food-grade titanium dioxide must be 99 percent pure, there’s still a risk of it containing potential contaminants, such as mercury, lead and arsenic. Additionally, inhaling the mineral over time can possibly cause it to build up in your body, leading to adverse effects.
Uses

Ultimately, most experts advise moderation, as titanium dioxide is typically found in processed foods that come with their own health risks.

In general, nanoparticles have been shown to accumulate in the body, particularly in organs in the gastrointestinal tract, along with the liver, spleen, and capillaries of the lungs.

2: Clarification mechanism of coagulant

Chemical coagulation is a process in which chemical agents (coagulants) are added to water treatment to make colloidal dispersion system destabilize and agglomerate. In the coagulation process, small suspended particles and colloidal impurities are aggregated into larger solid particles to separate particulate impurities from water, which is called coagulation clarification.

After adding coagulant into water, colloidal particles and other small particles can be polymerized into larger flocs through the comprehensive action of mixing, coagulation and flocculation. The whole process of coagulation and flocculation is called coagulation.

(1) Destabilization and condensation of colloids

Adding electrolyte to water can compress the electric double layer and destabilize the colloid. The main mechanism is that the electric double layer of colloidal particles in water is compressed or neutralized by adding aluminum salt or iron salt coagulant. The coagulant and raw water are mixed rapidly and evenly, and a series of chemical reactions are produced to destabilize. This process takes a short time, generally about 1 min. Some cationic polymers can also play a role in the destabilization and condensation of colloids in water. These polymers have a long chain structure and positive charge in water. Their destabilization and condensation of colloids in water is due to the interaction of van der Waals force adsorption and electrostatic attraction.

(2) Flocculation and formation of floc (alum)

The particle size of the initial flocculate formed by colloid destabilization and coagulation in water is generally more than 1 m. at this time, Brownian motion can no longer push them to collide and form larger particles. In order to make the initial flocs collide with each other to form large flocs, it is necessary to input additional energy into the water to produce a velocity gradient. Sometimes it is necessary to add organic polymer flocculant into water, and the adsorption bridging effect of long chain molecules of flocculant is used to improve the probability of collision and adhesion. Flocculation efficiency usually increases with the increase of flocculate concentration and flocculation time.

Compared with polyaluminum chloride, polyaluminum chloride has the advantages of high density, fast settling speed and wide pH adaptability; the coagulation effect is less affected by temperature than that of polyaluminum sulfate; however, when adding ferric salt, it should be noted that when the equipment is not in normal operation, the iron ions will make the effluent color, and may pollute the subsequent desalination equipment.