The hammer itself can be operated using a pneumatic or hydraulic system, with hydraulic hammers being the preferred choice in most cases due to their consistent performance and reliability. The drill bit used is often designed specifically for marine environments, featuring reinforced materials and cutting edges optimized for hard substrates.

The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.

2. Marine Construction When constructing offshore platforms, bridges, or wind farms, the stability of foundations is paramount. Hammer drilling provides a reliable method to secure pilings and conduct deep foundation work, ensuring that structures can withstand harsh marine conditions.

Burg'ulash jarayonida ishlatiladigan asboblar, o'z navbatida, operatorlarning qobiliyatlari va tajribasiga ham bog'liq. Tajribali operatorlar odatda virkash bemalol bajarishadi, shuningdek, yirik hajmdagi ishlarni tezroq amalga oshirishadi. Bu esa ularning ishlov berish vaqtini qisqartiradi va natijada rentabellikni oshiradi.

- Discharge Size The size of the discharge pipe affects how quickly mud can be expelled. Larger discharge openings can accommodate thick mud without clogging.

The 185 CFM diesel air compressor is versatile enough to serve numerous applications. Here are a few prominent ones

The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal.

Conclusion