selección del material del eje de la bomba
.
A DTH hammer is a type of percussion drilling tool that functions by delivering a series of rapid impacts to the drill bit, which then breaks the rock or other materials beneath the surface. The term down-the-hole refers to the hammer being placed directly above the drill bit, allowing the energy from the hammer to be transferred efficiently into the drill bit. This method enhances the speed and effectiveness of drilling operations, particularly in hard rock formations.
1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
Sustainable drilling practices also include the use of biodegradable drilling fluids and systems that reduce the risk of leakage and contamination. Mining companies are increasingly held accountable for their environmental impact, and the progress in drilling technology is reflective of a broader industry shift towards sustainability.
5. Долговечность Дизельные двигатели известны своей надежностью и долговечностью. Они могут работать в тяжелых условиях и при этом сохранять свою производительность на высоком уровне.
4. Reliability Built with robust components, portable rotary air compressors are designed to withstand tough working conditions. They require less maintenance and have longer service lives, resulting in cost savings over time for users.
Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed
Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed