Продажа гусеничных буровых установок

At its core, submarine hammer drilling employs a powerful hammer mechanism to drive a drill bit into the seabed. The system utilizes both air and water pressure to deliver repeated impacts on the drill bit, which enables it to break through hard rock formations or sediments that might hinder installation efforts for marine infrastructure. The design of the hammer ensures that the energy is efficiently transmitted to the drill bit, allowing it to operate at significant depths.


...

  • 1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.
  • ...

    DTH drilling refers to a method where the drilling bit is located at the end of a drill string, below the surface of the ground. This technique is distinguished by the use of high-performance percussion hammers, which are positioned on the drill bit. DTH drilling involves the use of compressed air to deliver rapid impacts, breaking rock into smaller fragments. This method is particularly effective in hard rock formations, making it a preferred choice for mining operations and various drilling applications.


    ...