coût de la machine de forage

The primary function of a drainage pump is to collect and remove water from a specified area. Most commonly used in basements, crawl spaces, and construction sites, these pumps are equipped with a float switch that activates the pump when water reaches a certain level. Once the water is detected, the pump will turn on, drawing the water into its casing and expelling it through a discharge pipe to a designated drainage area. This process continues until the water level drops below the float switch, at which point the pump turns off.


...

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.

...

Die Herstellung von Sandpumpen ist ein dynamisches Feld, das kontinuierlichen Fortschritt und Anpassungsfähigkeit erfordert. Die Hersteller sind gefordert, innovative Lösungen anzubieten, die den steigenden Anforderungen der Industrie gerecht werden, während sie gleichzeitig effizient und kosteneffektiv arbeiten. Mit dem Fokus auf technologische Entwicklungen und Anpassungen an die Marktentwicklungen werden die Hersteller von Sandpumpen eine wichtige Rolle in der zukünftigen Entwicklung der Bau- und Bergbauindustrie spielen.


...