The Importance of Mining Slurry Pumps

2. Rock drill: used to drill holes with a diameter of 20 ~ 100 mm and a depth of less than 20 meters in rocks above medium and hard. According to its different power can be divided into pneumatic, internal combustion, hydraulic and electric rock drill, of which pneumatic rock drill is the most widely used.

1. Steel Manufacturing In steelmaking, large amounts of slag are produced during the refining process. Vertical slag pumps effectively transport this byproduct to treatment facilities or disposal areas.

En conclusion, les barres de forage, bien que souvent sous-estimées, sont des composants essentiels pour l'industrie minière et pétrolière. Leur conception et leur fabrication nécessitent des connaissances approfondies des matériaux et des conditions de travail. Que ce soit en acier au carbone ou en acier inoxydable, les barres de forage sont cruciales pour assurer des opérations de forage efficaces, sûres et rentables. À mesure que l'industrie évolue avec des technologies de pointe, il est essentiel de continuer à innover dans le domaine des matériaux utilisés pour les barres de forage, afin de répondre aux défis futurs d'une exploration toujours plus profonde.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

Low atmospheric pressure on Mars influences many physical and chemical processes. One of the most significant effects is the boiling point of water. In a low-pressure environment, water boils at a much lower temperature. On Mars, if liquid water were to exist on the surface, it would quickly evaporate or freeze due to the low pressure, creating challenges for the search for life.

Looking ahead, the market for directed drilling rods is poised for continued expansion. As the global energy landscape evolves, driven by the need for sustainable and efficient resource extraction, directed drilling technologies will play a pivotal role. The ongoing developments in technology, including artificial intelligence and machine learning, are expected to further enhance the effectiveness of directed drilling rods.

Conclusion

Equipment and Technology