marte sur le forage
3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.
When exposed to the impact and pressure experienced in a jaw crusher, manganese steel undergoes a transformation. Instead of cracking or breaking, it work-hardens, becoming harder and more durable under the stress of crushing. This property is vital for jaw plates, which must withstand immense forces while maintaining their structural integrity over extended periods.
3. Toggle Mechanism
Advantages of Submarine Hammer Drilling
2. The pump selection is too small, the pump can not reach the user's required working conditions or process pressure, affecting the user's entire production effect or the overflow of the feed pool: in addition, the pump runs under a small flow rate for a long time, and the shaft may be broken.
Seamless Integration
Seamless Integration