18 буровых стержней
Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
One of the notable advantages of submarine hammer drilling is its efficiency in penetrating tough materials. Traditional drilling methods may struggle with hard rock formations, often resulting in slower progress and increased operational costs. Hammer drilling wears less on the drill bit, ultimately reducing the frequency of replacements and downtime.
perforación martillo de agujero submarino pdf

Slurry pump will be found in the use of the process of blockage, so how do we deal with this problem, many customers think that this is a more complex problem, but if the blockage problem is not handled well, it will cause damage to the equipment, which will also affect the efficiency of use.
3. Effluent Pumps Specifically intended for the removal of grey water or light solids, effluent pumps can also be effectively utilized for mud evacuation, provided the sediment is not too thick or heavy.
pompes d'évacuation de boue

In many cases, gravel pump manufacturers also provide tailored solutions to meet the specific needs of their clients. Customization can include pump size, material compatibility, and additional features such as improved sealing systems and automated controls. By collaborating with clients to understand their unique requirements, manufacturers can deliver high-performing pumps that enhance productivity and minimize downtime.
fabricantes de bombas de grava

Safety in Drilling Operations
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.