compressor de ar móvel diesel

  • Due to the machine's working environment being prone to intense vibrations and impacts, constantly observe the dynamics of various parts during operation. If you detect abnormal noise or other irregularities, shut down the machine immediately for inspection and repair before resuming operation. If hydraulic system connectors leak or components become loose, shut down the machine for adjustment and tightening. After ensuring everything is normal, you can resume operation. Before completing each shift, lower the hydraulic hammer to the lowest position and retract all other hydraulic cylinders to their shortest length. If moving a distance, keep the mast leaning backward. For the machine's components, accessories, and electrical equipment, perform regular inspections, especially the connections in the wiring of the motor. During operation, there should be designated personnel for guidance. The guide and the operator should check signals with each other before work and cooperate closely. At the start, use a bell or other methods to signal and inform surrounding personnel to move away. The machine should start at a low speed and gradually accelerate to high speed.
  • ...

    2. Technological Innovation The pump manufacturing industry is continually evolving, with advancements in materials, design, and efficiency. Suppliers that invest in research and development are more likely to offer innovative products that can withstand the demanding conditions of drilling operations. Features like variable speed control, improved hydraulic efficiency, and enhanced wear resistance are highly desirable.


    Поставщики грязевых насосов

    Поставщики

    ...


    2). Features:
    1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
    3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
    4, the selection of rolling drag plate, the track is not easy to wear.
    5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.

    ...