crusher liner factory

The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal.

...

1. การก่อสร้าง ในสถานที่ก่อสร้าง คอมเพรสเซอร์ CFM 185 สามารถจ่ายลมให้กับเครื่องมือที่ใช้ในการขนย้ายวัสดุ หรือการตัดและเจาะที่มีความต้องการใช้งานที่ต่อเนื่อง ซึ่งช่วยเพิ่มประสิทธิภาพการทำงานและลดเวลาที่สูญเสียไป


compresseur d'air cfm 185

compresseur

...

The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.


...