Jaw plates are commonly made from manganese steel, an alloy that boasts high wear resistance and toughness. Manganese steel typically contains between 11% to 14% manganese, which contributes to its unique and advantageous properties. The addition of manganese enhances the alloy's hardenability, allowing it to become exceptionally hard when subjected to heavy impacts. This characteristic makes manganese steel an ideal choice for high-stress applications, such as crushing abrasive materials in mining.

The Future of Portable Rotary Air Compressors

It is important to know that the shape of the sand has an important impact on the surface finish of the casting. Circular sand is better than triangular sand because the triangular sand has a large gap, which is easy to lead to defects such as porosity; According to the nature of the casting, the sodium silicate quartz sand is selected to form a spalling layer, and combined with the characteristics of cooling and shrinkage of the casting, the surface defects are reduced. Coating a protective layer on the surface of large castings, such as the film on a coated sand mold, can improve the surface finish of the sand mold and reduce the surface defects of the casting.  

Key Benefits of Portable Rotary Air Compressors

Conclusion

Another notable benefit is their compatibility with various drill rigs. Many modern drilling machines are designed to accommodate drill rods of different sizes, and a 20mm rod fits well within this spectrum. This compatibility reduces downtime during rig setup and allows for faster transitions between different drilling tasks.

Regular replacement of wear-prone parts like drill bits and filters is an indispensable part of maintenance work. Establishing a reasonable replacement schedule based on usage frequency and working conditions can effectively prevent failures, ensuring the continuity and efficiency of operations.

3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.

2. Road Work Ideal for applications such as road repair and maintenance, where heavy equipment is needed.

When exposed to the impact and pressure experienced in a jaw crusher, manganese steel undergoes a transformation. Instead of cracking or breaking, it work-hardens, becoming harder and more durable under the stress of crushing. This property is vital for jaw plates, which must withstand immense forces while maintaining their structural integrity over extended periods.