couverture de pompe à boue oem


(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.

...

The versatility of slurry pumps makes them indispensable across several sectors. In mining, for instance, these pumps are crucial for transporting slurry mixtures from ore extraction sites to processing plants. In the construction industry, they facilitate the disposal of wastewater and construction debris. The factory produces custom solutions tailored to specific industry requirements, ensuring that each pump can handle unique operational challenges.


...

In the world of industrial machinery, crushers play a crucial role in the processing of various materials. One particularly notable model is the tungsten crusher, designed specifically for the crushing and processing of tungsten-related materials. Tungsten, known for its remarkable hardness and high melting point, poses significant challenges in terms of both mining and processing. Therefore, specialized machinery, such as the tungsten crusher, is essential for efficient operations in various industries.


...

The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.


...