2. Jaw Plates

Regular replacement of wear-prone parts like drill bits and filters is an indispensable part of maintenance work. Establishing a reasonable replacement schedule based on usage frequency and working conditions can effectively prevent failures, ensuring the continuity and efficiency of operations.

The Slurry Pump Blade Factory Engineering Efficiency and Innovation

The hammer itself can be operated using a pneumatic or hydraulic system, with hydraulic hammers being the preferred choice in most cases due to their consistent performance and reliability. The drill bit used is often designed specifically for marine environments, featuring reinforced materials and cutting edges optimized for hard substrates.

Hersteller von Sandpumpen

Equipment and Technology

However, there are challenges associated with the use of manganese jaw plates. The production process requires careful handling and quality control to ensure consistent hardness levels throughout the material. Additionally, while manganese steel provides excellent wear resistance, it can be more challenging to machine and fabricate compared to other steel types.

(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.

- Industrial Applications Facilities that experience high moisture levels or require regular removal of liquids from particular areas benefit from industrial-grade drainage pumps.