slurry pump casing
Jaw plates are commonly made from manganese steel, an alloy that boasts high wear resistance and toughness. Manganese steel typically contains between 11% to 14% manganese, which contributes to its unique and advantageous properties. The addition of manganese enhances the alloy's hardenability, allowing it to become exceptionally hard when subjected to heavy impacts. This characteristic makes manganese steel an ideal choice for high-stress applications, such as crushing abrasive materials in mining.
5. Enhanced Safety Safety is a paramount concern in drilling operations. DTH hammer drilling minimizes the risks associated with traditional drilling methods, such as drill string failures or excessive vibration. The compact design of DTH equipment also allows for easier handling and reduced risk of accidents on job sites.
In today’s rapidly evolving industrial landscape, the demand for drilling equipment has surged significantly. This growth can be attributed to a combination of factors, including advancements in technology, increased exploration activities, and the ongoing need for infrastructure development across various sectors. As industries continue to thrive, the sale of drilling equipment has become a vital focal point for manufacturers, suppliers, and end-users alike.
3. Epiroc Epiroc, a spinoff of Atlas Copco, focuses on mining and infrastructure equipment, including DTH hammers. Their modern designs and innovative technologies cater to the needs of contemporary drilling operations.
Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.