Cold wire drawing is mainly used in the production of hardened low carbon steel wire, with a diameter of 8 mm steel bar to play a fixed role in the development of the construction industry has played a role in promoting the development of the construction industry, widely used. The bonding and anchorage performance between cold wire drawing and concrete is good. When used in components, the phenomenon of cracking in the anchorage area of components and damage caused by steel wire slip is fundamentally eliminated, and the bearing capacity and anti-cracking capacity of the end of components are improved.
Stainless steel barbed rope is often used in various engineering projects because of its good anticorrosion ability, but it is difficult to be accepted by ordinary families because of its high price. So what material of barbed rope has better anticorrosion ability?
- Stainless steel wire drawing is a metal working (stainless steel) process, is a popular surface treatment technology in the stainless steel and aluminum products industry today. It is the effect of drawing stainless steel and aluminum products. So galvanized wire and stainless steel wire are two different products. Defects such as surface film and surface inclusion can be found and treated by conventional techniques in order to locally remove the surface film and surface inclusion from the surface of galvanized iron wire. Excess foam is formed when soap and surfactants such as saponified fats are brought into the tank.
Hexagonal mesh is also known as twisted mesh, insulation mesh, soft edge mesh. It is made of a single mesh reel. The mesh, mesh, galvanized and PVC coated properties are the same as the cage. This product can be different shapes, sizes of the stone into the alloy net to form a flexible whole, can be lifted, cars, shipping to the L place, the alloy net connected into a larger whole, the construction of throwing convenient, fast, good economic performance.
Post time: 16-11-22Construction welding net work wall insulation project using galvanized welding network in wall insulation and rust engineering project plays a necessary role, wall painting batch putty network is divided into two kinds: this is galvanized welding network; Another is to change the wire drawing wire welding mesh, according to the provisions of the region, construction enterprises to carry out effective material selection. Construction welded wire mesh new mink cage new mink cage grommet see more 1 inch, from silk in 2 mm up and down, management method is simple and easy, a mesh surface bright and clean and is not easy to scratch mink, galvanized welded wire online zinc quantity proportion, it is not easy to rust, new mink cage up more convenient, mink settled in natural environment more comfortable, the price also is higher than before the same specifications of the mink cage competitive many, But the overall character is not harmed at all, it is stronger.
Its specific design layout principle is:
Post time: 28-02-23The barbed rope produced by the barbed rope factory adopts the way of winding in order to facilitate transportation, and the disk weight of the galvanized barbed rope is different according to the size.
- There are many blade specifications, first of all there are three types: spiral type, straight line, spiral cross type. Different units, the strength of the protection of different rope models. The blade barbed wire is mainly made of low carbon steel wire and aluminum magnesium alloy wire by spraying and welding. The blade material of the blade barbed wire is attached to the core wire made of stainless steel wire with professional mechanical strength, so the blade barbed wire has the advantages of good strength and aging resistance.
We must have a certain understanding of the hexagonal net, we are swayed by the beautiful shape of the hexagonal net, not only the shape of the hexagonal net is very beautiful, in fact, the practical value of survival is very high. Hexagonal mesh of all kinds of guardrail, the value of the highway is more prominent, it is not only used in a variety of roads, in a variety of sports ball venues and landslides try to take care of, but also to reach a very close utility.
Heavy hexagonal net, also known as large size hexagonal net, or gabion mesh, made of steel wire by twisting mesh machine. This product is very versatile. Can be used for slope support, foundation pit support, mountain rock surface hanging net shotcrete, slope planting (greening), railway highway isolation barrier, it can also be made of stone cage, stone pad, for rivers, DAMS and seawall anti-erosion protection and reservoirs, river interception with stone cage.
- Hard black galvanized iron wire is made of low carbon steel wire directly drawn by drawing machine. The primary characteristics of hard black galvanized iron wire are high hardness and bright appearance. Primary use for welding hanger, umbrella, metal mesh, basket, basket and other metal products. Soft black galvanized iron wire is made of low carbon steel wire after annealing and softening, and then cold drawn. The primary feature of soft black galvanized iron wire is good flexibility, slightly higher hardness, bright appearance. Mainly used for metal mesh weaving process, electric welding mesh, welding process products.
- Powder coating color is divided into: blade thorn rope blue, grass green, dark green, yellow. Spray blade gill net is made of hot-dip galvanized steel plate or stainless steel sheet stamped out of sharp knife sheet, high tension galvanized steel wire or stainless steel wire as core wire combination of blocking devices. Because the shape of the thorn rope is not easy to contact, so it can reach excellent protective barrier effect. The primary raw materials of products are galvanized sheet, stainless steel plate, high quality low carbon steel wire (electric galvanized, hot galvanized, coated plastic, plastic spray) wire, blue, green, yellow and other colors.
- 2, the production and installation is simple and fast, the use of patented friction connection or special connection accessories for installation, greatly improve the installation efficiency.
- Post-plating treatment of hot-dip galvanized wire for enhanced protection function, decoration and other special purposes (passivation, hot melting, closing and hydrogen removal, etc.). After galvanized, chromate passivation or other conversion treatment is generally required, forming the corresponding type of conversion film is one of the key processes to ensure the quality of plating. Because hot-dip galvanized wire has a long anti-corrosion life, a wide range of applications, hot-dip galvanized wire to net, rope, wire and other ways are widely used in heavy industry, light industry, agriculture, widely used in the manufacture of wire mesh, highway guardrail and construction engineering and other fields.
The methods to control the thickness of galvanizing are as follows: you can slow down the lifting speed of the workpiece, control the time of galvanizing as far as possible, add the appropriate amount of thinning alloy, reduce the thickness, and improve the temperature of hot-dip galvanizing. But consider the zinc pot, iron pot should not exceed 480 degrees, ceramic pot can be 530 degrees, which can reduce the time of zinc immersion.
Using activated carbon mat to remove surface active substances, or through filtration to make the foam is not too stable, this is an effective measure; Other measures should also be taken to reduce the amount of surfactant introduced to Z.
When the zinc layer is seriously damaged and endangers the iron matrix, the zinc will produce electrochemical protection on the matrix, the standard potential of zinc is -0.76V and the standard potential of iron is -0.44V. When zinc and iron form microbatteries, the zinc will be dissolved as the anode, and the iron will be protected as the cathode. Obviously, the atmospheric corrosion resistance of hot dip galvanizing is better than that of electric galvanizing.
- Appellation: Hook fence net is a variety of fence net. The diameter of the opposite side of each mesh is generally 6.5cm-14cm. The diameter of the wire used is generally from 3.5mm to 6mm. Wire material is generally Q235 low carbon wire. The iron wire is welded into black pieces of decorative hook mesh by ginning. The overall size of the mesh is 1.5 m X4 m, 2 m X4 m, 2 m X3 m. The general surface treatment is cold (electric) galvanized treatment. There are also hot dip galvanizing, dipping, spray. But overall, 99 percent is cold (electric) galvanized.
Post time: 31-05-23Steel mesh jinsu appearance treatment: polyethylene thermoplastic powder coatings is also called polyethylene powder coating, is the high pressure polyethylene (LDPE) as the basic material, adding a variety of function additives, colors, its antiseptic powder coating manufacturing processes, jinsu coating layer has the function of chemical, shock, circuitous, acid, salt fog corrosion, decorate a function and has good appearance.
- When pickling, the galvanized wire needs to be slowly put into the cylinder to avoid liquid splashing on the body. Protective glasses should be worn in the pickling process to prevent acid splash out and hurt people. Pay attention to safety when receiving the line operation, the line tray needs to be lightly placed, stacked neatly, not more than 5 disks. No matter what kind of auxiliary materials are used, galvanized wire drawing must comply with national regulations, otherwise it is not allowed to be used.
- Hot dip galvanizing is an effective metal preservative, mainly used in various industries of metal structure facilities. The steel parts after rust removal are immersed in the molten zinc solution at about 500℃, so that the surface of the steel member is attached with zinc layer, so as to play the purpose of anticorrosion. Hot dip zinc is to immerse the steel member after rust removal into the molten zinc liquid at about 600℃, so that the surface of the steel member is attached with zinc layer. The thickness of the zinc layer is not less than 65μm for the thin plate below 5mm, and not less than 86μm for the thick plate above 5mm. So as to play the purpose of corrosion prevention.
- The common specifications of small hexagonal mesh in production are: the width is 1.22m, and the commonly used width is generally 1m. In terms of length, there are basically no restrictions on small hexagonal nets. 1-100 meters can be produced. The production wire diameter of small hexagonal mesh is generally No. 27 wire to No. 18 wire, and the aperture size is 0.95cm-5.08cm.
- In the calculation process of 12*14 specifications of barbed rope, it can not be calculated according to the above calculation formula, because first of all, two specifications of raw materials are used, the thinner the wire diameter, the higher the processing cost. Generally speaking, a kilogram of 12*14 barbed rope can reach about 7.5 meters, and the ratio of warp wire to barbed rope cannot be calculated according to the traditional ratio of 7 to 3. The exact amount of stinging and use the warp need to increase after a series of professional measurement on the loss of raw materials and so on factors to calculate.
Take 20cm galvanized wire for acid fog experiment, check the zinc content of galvanized wire through the balance to see whether it meets the zinc layer standard required by customers, ensure that the metal wire achieves the role of rust and corrosion prevention, and meet the service life required by customers. Galvanized iron wires must be packed in good condition, bound neatly and orderly, and bound inward to prevent scratches during transportation. The inspection standard of galvanized iron wire also includes the tensile test, which is decided according to the material of the galvanized wire order ordered by the customer, and it needs to be tested by comparing the raw material list.
- For single-layer wound non-rotating wire rope, it is necessary to strictly abide by the above principles, otherwise it is easy to cause permanent deformation of wire rope structure; In the case of multilayer winding, the rotation of the rope is determined by the orientation of the reel’s rope groove to lay the foundation for the next layer. The friction between the wire rope and the extrusion pressure of the multi-layer winding drum are large, and the disorderly rope phenomenon is easy to occur. Therefore, the wire rope with a diameter slightly smaller than the pitch of the rope groove and the diameter of the rope groove should be selected to add the touch area between the wire rope and the drum.
- D, coating adhesion; The zinc layer of the plating parts should be firmly combined with the base metal with sufficient adhesion strength, and will not fall off or bulge after the hammer test.
Post time: 09-09-22Cooling can be in the groove close row of thin wall plastic pipe, through the flow of tap water for cooling, can also be used as a temperature control device titanium pipe. In the process of electroplating galvanized wire, it is necessary to stir the plating solution to obtain the composite coating with particles dispersing in the matrix metal. Stirring methods include mechanical stirring, air stirring, ultrasonic stirring, bath circulation, etc.
- Performance characteristics of zinc coating: zinc layer of thick galvanized wire zinc layer crystallinity meticulous, uniform and no gap, good corrosion resistance; The zinc layer obtained by electrogalvanizing is very pure and corrodes slowly in the gas, liquid and fog of acid and alkali, which can effectively protect the steel matrix. Galvanized layer can also be chromic acid passivation treatment into a variety of colors, beautiful and generous, with good decorative; The zinc layer on the galvanized wire has good ductility, can be cold blanking, rolling, bending and other molding without damage to the zinc layer.
Large rolls of galvanized wire in oxygen violently extinguished, spark, and sodium block, magnesium strip in oxygen extinguished, no spark phenomenon. This phenomenon is determined by the composition of galvanized wire. The galvanized wire used in the experiment is pig iron or steel wire, pig iron and steel are iron and carbon alloy, containing iron and carbon two elements of complex material. Carbon in galvanized wire will produce carbon dioxide when extinguished, solid into gas, volume will shrink rapidly.