The main components of submarine hammer drilling equipment include the drill rig, hammer, drill pipes, and the drill bit. The drill rig is often mounted on a surface vessel or a floating platform and is designed to support the excessive weight and dynamic forces encountered during drilling operations.

CFM, or Cubic Feet per Minute, is a crucial metric in assessing the performance of air compressors. It indicates the volume of air that the compressor can deliver at a specific pressure level. The CFM 185 air compressor typically delivers an impressive 185 CFM, making it suitable for a wide range of applications that require substantial air supply. This high CFM rating enables the compressor to power multiple tools simultaneously, effectively enhancing productivity on job sites.

3. Мобильность Большинство дизельных компрессоров имеют компактный и прочный дизайн, что позволяет легко транспортировать их с одной площадки на другую. Наличие колес и ручек значительно упрощает процесс перемещения.

4. DIY Projects Hobbyists and DIY enthusiasts are also discovering the benefits of portable rotary air compressors, using them for various projects from woodworking to automotive detailing, proving that these machines are not just for professionals.

Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

One of the notable advantages of submarine hammer drilling is its efficiency in penetrating tough materials. Traditional drilling methods may struggle with hard rock formations, often resulting in slower progress and increased operational costs. Hammer drilling wears less on the drill bit, ultimately reducing the frequency of replacements and downtime.

Applications