Parts of a Jaw Crusher Understanding the Mechanical Components

The Manufacturing Process

Several manufacturers are recognized as key players in the DTH hammer industry. Their innovations and engineering prowess have contributed significantly to the advancement of drilling technology.

Regularly inspect the electrical and hydraulic systems to ensure that all cables and connectors are free from wear or damage, and that the hydraulic oil level and quality are in good condition. This can prevent sudden system failures and ensure the safe and stable operation of the drilling rig.

There are several types of drilling machines used in mining, each designed for specific tasks and environments. The most common types include

2. Construction and Civil Engineering Heavy slurry pumps are equally important in construction, particularly in the dredging process where materials like sand, silt, and clay are extracted from water bodies. They help in maintaining the flow of materials and can be used in dewatering applications during excavation processes, significantly accelerating project timelines.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

In the world of drilling operations, particularly in oil and gas exploration, the mud pump plays a crucial role. A mud pump is a vital piece of equipment that circulates drilling fluid (commonly referred to as mud) from the surface to the drill bit and back up to the surface. This fluid serves multiple functions it cools and lubricates the drill bit, removes cuttings from the wellbore, and maintains the necessary pressure to prevent the influx of formations fluids. Therefore, accurately calculating the performance of a mud pump is essential for efficiency and safety in drilling operations.