The following matters should be paid attention to during the use of the drilling rig, and the correct use can bring greater benefits

3. Woodworking Carpenters and woodworkers use spiral drill bits for their ability to create clean and precise holes in various types of wood. The smooth finish left by these bits is often essential for aesthetic purposes.

Equipment and Technology

Manufacturing Sector

One of the most critical components of a jaw crusher is the jaw plates. These are the surfaces that come into direct contact with the material being crushed. They typically come in two varieties the fixed jaw plate and the movable jaw plate. The fixed jaw plate is stationary and mounted on the frame, while the movable jaw plate moves back and forth, creating a crushing motion. The wear and tear of jaw plates are significant since they constantly encounter abrasive materials. Hence, they are often manufactured from high-grade manganese steel to enhance their durability.

In mining applications, high density slurry pumps play a crucial role in transporting mineral slurries from the processing plant to the tailings storage facility. Their robust construction and efficient design help minimize downtime and maintenance costs, ultimately improving productivity and profitability for mining companies.
In the construction industry, high density slurry pumps are utilized for handling concrete mixtures, grout, and other construction materials. Their ability to handle high-density slurries with ease ensures smooth and efficient operations, leading to faster project completion times and cost savings.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

 Conclusion

4. Submersible Pumps Often used in dewatering applications or where space is limited, submersible pumps are designed to operate while submerged in the slurry. They are typically used in mining and construction to remove water mixed with soil or other materials.