Oil seals are always exposed to a lot of chemicals, both mild and harsh chemicals. The seals react by showing some signs like cracks, blisters, and discoloration especially when the chemical is harsh. This clearly shows that the chemical is not compatible with the seal, which goes as far as affecting its cross-link density (increase or decrease). When the cross-link density increases, the seal material becomes harder, but when it decreases, the seal material becomes softer.

By far, nitrile is the most popularly used, but buyers who need seals for applications involving high-speed shaft rotation increased interest. Viton is another alternative for silicone and poly-acrylic because it’s more resistant to harmful chemicals and abrasion and works better in higher temperatures.

Oil seals are available in an immense range of sizes, for shafts from a few millimetres to several metres. Once the shaft diameter, groove diameter (housing diameter) and groove width are known, selecting an appropriate oil seal is a simple task. An oil seal or its product description is usually associated with three dimensions, for example 6x15x4. These refer to the sizes of the hardware for which the oil seal is designed. In this example, this oil seal is suitable for: 6-mm shaft diameter x 15-mm groove diameter x 4-mm minimum groove width.

A wide range of sealing devices are used in various machines.
Sealing devices serve the following functions:

A: Existing molds: 30 days, depending on ordering quantity.