There are many ways to improve the appearance and finish of steel castings by large-scale foundry processing manufacturers, such as selecting good raw materials, adopting advanced casting technology, and subsequent surface treatment technology.

When it comes to the advantages of manganese jaw plates, their longevity and resilience stand out. The ability to withstand abrasive materials without excessive wear ensures that mining operations can run smoothly with minimal interruptions. This aspect not only contributes to cost savings but also reduces the frequency of maintenance and replacement of jaw plates.

Applications in the Mining Industry

3. Reduced Costs Although the initial investment for DTH rigs can be high, their efficiency and speed in drilling operations can lead to significant cost savings in the long term. The ability to drill faster and more accurately reduces overall project time and labor costs.

Conclusion

Understanding the ZJ Slurry Pump

1.How it Works:
Progressive cavity pump slurry operates on the principle of positive displacement, where a rotor turns inside a stator, creating cavities that move the fluid through the pump. This design allows for a smooth and consistent flow of the slurry, making it ideal for challenging industrial applications.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

4. 이동성 많은 디젤 압축기는 이동이 용이하도록 설계되어 있습니다. 바퀴가 달려 있어 다양한 작업 현장에 쉽게 이동할 수 있으며, 이는 작업의 유연성을 높이는 데 도움이 됩니다.