dth drill bits

በዘመናችን ዘመን ውስጥ የሂደት መሣሪያዎችና የስራ መሳሪያዎች ላይ በጣም ያማርከዋል፡፡ እንደዚህ ያለው የሚያበርክት ውድድር የሰላም ሳይሆን ይፈልዳል፡፡ ይህም ቢወዳድጅ በዚህ ዙርየት እንዳንቀጣ የሚኖረው በመለክአን የሚኖረው በዚህ ዘመን በጣም የተጠቃሚ ነው፡፡ ወይም በመሳሪያ ፖር ቱር ይልቅ በፊት ከዚህ የተነሣ የታዋቅ በብስብስ ይውላል፡፡


...

  • 1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.
  • ...

    Одним из ключевых моментов в производстве грязных насосов является выбор материалов. В Кыргызстане производители сталкиваются с необходимостью использования высококачественных и устойчивых к коррозии материалов, чтобы насосы могли функционировать в сложных условиях. Это значит, что компании должны постоянно заниматься инновациями, улучшая технологии и производственные процессы.


    Производитель грязных насосов

    Производитель

    ...

    2. Technological Innovation The pump manufacturing industry is continually evolving, with advancements in materials, design, and efficiency. Suppliers that invest in research and development are more likely to offer innovative products that can withstand the demanding conditions of drilling operations. Features like variable speed control, improved hydraulic efficiency, and enhanced wear resistance are highly desirable.


    Поставщики грязевых насосов

    Поставщики

    ...

    3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.

    ...