(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

The primary function of a drainage pump is to collect and remove water from a specified area. Most commonly used in basements, crawl spaces, and construction sites, these pumps are equipped with a float switch that activates the pump when water reaches a certain level. Once the water is detected, the pump will turn on, drawing the water into its casing and expelling it through a discharge pipe to a designated drainage area. This process continues until the water level drops below the float switch, at which point the pump turns off.

Applications

 Industries Empowered by Self-Priming Slurry Pump Solutions

2. Positive Displacement Pumps For more viscous slurries or when maintaining a consistent flow despite variations in pressure is essential, positive displacement (PD) pumps are ideal. These pumps work by trapping a fixed amount of slurry and forcing it through the discharge. PD pumps can handle thick and abrasive slurries, making them a preferred choice in mining and mineral processing applications.

The Benefits of 185 CFM Air Compressors

Jaw plates come in various designs and specifications, tailored to meet the specific requirements of different types of crushing operations. The two primary types of jaw plates are

Drilling equipment is essential in various sectors, including oil and gas, mining, construction, and environmental research. Each sector requires specialized machinery capable of performing specific tasks effectively. For instance, in the oil and gas industry, rotary drill rigs and downhole drilling tools are critical for accessing subterranean resources. In contrast, the mining sector demands heavy-duty equipment designed to penetrate solid rock and extract valuable minerals.

2. Construction and Civil Engineering Heavy slurry pumps are equally important in construction, particularly in the dredging process where materials like sand, silt, and clay are extracted from water bodies. They help in maintaining the flow of materials and can be used in dewatering applications during excavation processes, significantly accelerating project timelines.