compressor de ar parafuso rotativo portátil
Conducting a detailed inspection at least once a week can help us detect and address signs of wear or damage in a timely manner. This is particularly important for high-wear components such as drill rods and drill bits. At the same time, do not forget to check all bolts and nuts to ensure they have not loosened due to vibration, which is key to ensuring the stability of the equipment.
01 KEEP CLEAN
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
Cleaning method:
Open valve or desilting
Improved design of suction lines or desilting
Lower mounting height
Open valve or desilting
Improved design of suction lines or desilting
Lower mounting height