(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.

One of the notable advantages of submarine hammer drilling is its efficiency in penetrating tough materials. Traditional drilling methods may struggle with hard rock formations, often resulting in slower progress and increased operational costs. Hammer drilling wears less on the drill bit, ultimately reducing the frequency of replacements and downtime.

3. Flow Rate and Pressure Determine the required flow rate and the pressure at which the slurry needs to be transported. This will influence the type of pump chosen, as different pumps have specific performance curves.

4. Reduced Costs Despite potentially higher upfront equipment costs, DTH drilling can lead to substantial savings over time. The efficiency and speed of the method mean lower labor costs and quicker project completion times. Furthermore, the reduced need for extensive maintenance and downtime enhances overall productivity.

Furthermore, environmental sustainability has become a primary focus for energy companies amidst growing concerns about climate change. The 3 32 specification should also consider the impact of perforation methods on surrounding ecosystems. Employing precise and industry-accepted standards allows companies to conduct their activities with minimal disruption to the environment, preserving biodiversity and reducing the carbon footprint of drilling operations.

The Versatility and Application of 20mm Drill Rods

Submarine hammer drilling sees extensive applications in several sectors

3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.

Conclusion