Applications of DTH Hammer Drilling

Conclusion

Conclusion

Despite their crucial role, slurry pumps face several challenges. Abrasive materials can cause significant wear and tear, leading to frequent maintenance needs and potential downtime. This not only affects operational efficiency but can also lead to increased operational costs. Therefore, mining companies are continually seeking innovations in pump technology to enhance durability and efficiency.

Mars has an incredibly thin atmosphere, with surface pressure averaging about 0.6% of Earth’s. This is equivalent to about 610 Pascals compared to Earth's 101,325 Pascals at sea level. This stark difference is largely due to Mars' lower gravity and lack of a magnetic field, which makes it harder for the planet to retain gases essential for a thicker atmosphere.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

さらに、においてもle dhd380のがんでいます。たちがのにれることで、なスキルをにつけることができ、のにおいてもになります。このように、いでのがされるle dhd380は、もさらなるがまれています。