venta de compresores de aire giratorios portátiles

The production of rubber slurry pumps begins with the selection of high-quality materials. The primary components of these pumps include the pump casing, impeller, and wear components, all of which are crucial for efficient performance. Rubber, due to its excellent resilience and wear resistance, is widely used in constructing these components. Factories often source synthetic rubber, such as polyurethane, to enhance durability further, especially in harsh operating conditions.


...
venta de compresores de aire giratorios portátiles2025-08-16 07:32
1769


(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.

...
venta de compresores de aire giratorios portátiles2025-08-16 06:47
65

  • 1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.

    • ...
    venta de compresores de aire giratorios portátiles2025-08-16 05:44
    1943