Understanding Submarine Hammer Drilling

Une barre de forage est un long tube en acier qui est utilisé pour transférer la rotation et le couple du moteur de forage au bit de forage. La barre de forage est généralement conique à une extrémité, ce qui lui permet de se connecter à d'autres barres ou à un bit de forage. Les barres de forage sont disponibles dans une variété de tailles et de configurations, en fonction des exigences spécifiques du projet de forage.

What is a Diesel Air Compressor?

Understanding CFM and Its Importance

Bearings are essential in any machinery, serving to reduce friction and support rotating parts. In a jaw crusher, there are generally two types of bearings involved the main bearings that support the eccentric shaft and the bearings that support the pitman assembly. High-quality bearings are critical for the efficient functioning of the machine, and regular maintenance is necessary to ensure longevity and optimal performance.

Additionally, submarine hammer drilling is a versatile technique, suitable for various applications, including the installation of underwater pipelines, foundations for offshore structures, and the recovery of geological samples for research and analysis. This adaptability makes it an essential tool in the fields of marine engineering, environmental research, and resource extraction.

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.

(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor.