Applications

3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.

Slurry pump will be found in the use of the process of blockage, so how do we deal with this problem, many customers think that this is a more complex problem, but if the blockage problem is not handled well, it will cause damage to the equipment, which will also affect the efficiency of use.

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.

Clean the air filter daily before drilling operations.

Одним из ключевых моментов в производстве грязных насосов является выбор материалов. В Кыргызстане производители сталкиваются с необходимостью использования высококачественных и устойчивых к коррозии материалов, чтобы насосы могли функционировать в сложных условиях. Это значит, что компании должны постоянно заниматься инновациями, улучшая технологии и производственные процессы.

The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high

4. Reduced Costs Despite potentially higher upfront equipment costs, DTH drilling can lead to substantial savings over time. The efficiency and speed of the method mean lower labor costs and quicker project completion times. Furthermore, the reduced need for extensive maintenance and downtime enhances overall productivity.