The wear pattern of jaws can also influence how effectively they crush materials. Manganese jaw plates tend to develop specific wear profiles, which can aid in maintaining a consistent output size. This is highly beneficial for maintaining product quality and ensuring that crushed materials meet industry specifications.

Additionally, slurry pumps are used in tailings management, which refers to the disposal of waste materials left after the extraction of precious minerals. Efficiently transporting tailings to storage facilities ensures that mining operations remain sustainable and do not pose environmental hazards. The design and efficiency of a slurry pump can significantly impact the overall productivity of a mining operation, underlining their importance.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

Chocks en los Laminadores Elementos Clave en la Industria Metalúrgica

Herausforderungen im Markt

Accurate calculations concerning the mud pump are vital for several reasons. First, underestimating the necessary flow rate or pressure can result in insufficient cooling and lubrication for the drill bit, leading to quicker wear or even catastrophic failure. Conversely, overestimating these values can lead to excessive costs and energy consumption.

Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed