Ongoing missions, including rovers and landers, are equipped with advanced scientific instruments to explore the Martian surface and subsurface. Understanding the effects of Martian low pressure is crucial in assessing the planet's past and present habitability, as well as planning for future explorations.

1. Offshore Oil and Gas Exploration In the oil and gas industry, submarine hammer drilling is crucial for the installation of subsea pipelines and wellheads. The ability to efficiently penetrate the seabed allows for the secure placement of infrastructure that can transport hydrocarbons from extraction points to processing facilities.

Down-the-Hole Hammer Drilling An Innovative Approach in Mining and Construction

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.

Drilling rig is a tool used to directly mine stone. It drills through rock layers to extract stone or other stone works.

تعتبر ضواغط الهواء المحمولة اللولبية واحدة من الحلول الأكثر فعالية ومرونة في توفير الهواء المضغوط. بفضل كفاءتها العالية، وميزاتها القابلة للنقل، وقدرتها على تشغيل مجموعة واسعة من التطبيقات، فإنها تلبي احتياجات العديد من الصناعات. بغض النظر عن المجال، فإن استخدام ضواغط الهواء المحمولة اللولبية يمكن أن يساعد في تحسين الإنتاجية وتقليل التكاليف، مما يجعلها استثمارًا ذكيًا للمؤسسات التي تبحث عن حلول فعالة لمتطلبات الهواء المضغوط.

Additionally, submarine hammer drilling is a versatile technique, suitable for various applications, including the installation of underwater pipelines, foundations for offshore structures, and the recovery of geological samples for research and analysis. This adaptability makes it an essential tool in the fields of marine engineering, environmental research, and resource extraction.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank