Additionally, submarine hammer drilling is a versatile technique, suitable for various applications, including the installation of underwater pipelines, foundations for offshore structures, and the recovery of geological samples for research and analysis. This adaptability makes it an essential tool in the fields of marine engineering, environmental research, and resource extraction.

The Mechanism Behind DTH Drilling

Directed drilling rods, often referred to as directional drilling equipment, are specialized tools that allow for the precise placement of wells at various angles. Unlike conventional drilling methods, which typically follow a vertical path, directional drilling enables operators to reach multiple reserves from a single drilling site. This not only optimizes resource extraction but also minimizes environmental impact by reducing the surface footprint.

2. Acier allié Pour des applications nécessitant une résistance accrue à la fatigue et à la corrosion, des barres de forage en acier allié peuvent être utilisées. Ces alliages contiennent des éléments tels que le nickel, le chrome et le molybdène, qui augmentent leur résistance et leur longévité.

Advantages of Bullet Teeth

The Future of Mining Slurry Pumps

Conclusion

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank