3 мм буровые штанги
When the crawler pile driver is drilling, the current of the pile driver's ammeter shall not exceed 100A. If the ammeter current exceeds 100A, the drill pipe should stop and descend slowly, and the rotor always keeps turning. If the current drops below 100 amps and is stable, the drill pipe can continue to decline slowly.
Another significant advantage is the pump’s ability to operate under harsh conditions. The ZJ slurry pump is built to withstand high temperatures and corrosive environments, thanks to its selection of materials, including stainless steel and reinforced elastomers. This resilience results in fewer breakdowns and a longer service life, ensuring consistent productivity.
zj slurry pump
2. Rock drill: used to drill holes with a diameter of 20 ~ 100 mm and a depth of less than 20 meters in rocks above medium and hard. According to its different power can be divided into pneumatic, internal combustion, hydraulic and electric rock drill, of which pneumatic rock drill is the most widely used.
- Discharge Size The size of the discharge pipe affects how quickly mud can be expelled. Larger discharge openings can accommodate thick mud without clogging.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
