usine de pompage de boue sous-marine

Post-processing of large castings, large foundry processing manufacturers can use liquid sandblasting to clean the oxide scale and residue on the surface of the casting, which can not only remove impurities, but also play a role in polishing and improving the surface finish of the casting; Use grinding wheels, abrasive cloths, sandpaper and other abrasives to remove impurities such as burrs, protrusions and oxide scales on the surface of steel castings, so that the surface is smooth. In addition, methods such as mechanical, electrochemical and chemical polishing can further improve the gloss and corrosion resistance of castings.

...

  • 1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.
  • ...