The DTH hammer operates through compressed air, which is pumped through a series of valves and chambers within the hammer. When the air pressure builds up, it drives a piston that strikes the drill bit, creating a powerful force that breaks the material. This process continues in rapid succession, allowing the drill bit to penetrate the ground efficiently. The design of the DTH hammer allows for a larger drop height of the piston than traditional rotary drills, resulting in higher impact energy and better drilling performance.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

In the mining sector, jaw crushers are extensively utilized for the primary reduction of various materials. These include limestone, granite, and ore, all of which are naturally tough and abrasive. The effectiveness of jaw plates made from manganese steel directly impacts the efficiency of the crushing process. A well-designed jaw plate can significantly reduce downtime caused by wear and tear, leading to increased productivity and lower operating costs for mining companies.

Herstellung von Sandpumpen Ein Blick auf den Markt und die Technologien

4. Effluent Pumps While these pumps are similar to drainage pumps, they are explicitly designed to handle wastewater and effluent from residential and industrial applications, transferring it to a treatment or disposal area.

In the world of drilling and excavation, the efficiency of your equipment largely depends on the quality of the tools used. One such crucial component is the cutting tool itself, and in terms of augers, bullet teeth play an essential role. This article aims to explore the significance of bullet teeth for augers, their design, applications, and advantages.

In recent years, the industrial landscape has undergone significant transformations driven by the need for efficient equipment and reliable performance. Among various tools that have gained prominence, air compressors have become invaluable assets across various sectors such as construction, automotive repair, manufacturing, and even home improvement. Among these, the 185 cubic feet per minute (CFM) air compressors have set a benchmark for functionality and versatility. This article will explore the features, applications, and growing demand for 185 CFM air compressors, often regarded as the workhorses of the industrial sector.

2. Pedestal Sump Pumps These pumps have a motor mounted above the sump, which means they may be less susceptible to mud clogging. However, they are generally less efficient than submersible pumps in handling muddy water.