(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

3. Sandblasting and Painting These compressors can provide the necessary air supply for sandblasting operations and spray painting, ensuring smooth and efficient application.

Энэ бүхний үндсэн дээр, чулуу бутлуурын плита нь барилгын материалын бутлах үйл явцын зүрх сэтгэл бөгөөд үүнээс шалтгаалан бидний бүтээн байгуулалт, хөгжлийг дэмжих чухал сталаар ажилладаг.

The mud pump market is populated by various suppliers, ranging from niche manufacturers to global leaders. Companies like Gardner Denver, Halliburton, and Schlumberger are well-known for their extensive product offerings and technological expertise. Additionally, there are many regional suppliers that cater specifically to local markets, offering competitive prices and localized support.

Submarine hammer drilling, often referred to as underwater percussion drilling, is an advanced technique utilized primarily in marine construction and resource exploration. This method combines the principles of traditional drilling with hydraulic and pneumatic operations, enabling the effective penetration of hard substrates beneath the sea floor. In this article, we will explore the processes, equipment, advantages, and applications of submarine hammer drilling.

Parts of a Jaw Crusher Understanding the Mechanical Components

In the mining sector, jaw crushers are extensively utilized for the primary reduction of various materials. These include limestone, granite, and ore, all of which are naturally tough and abrasive. The effectiveness of jaw plates made from manganese steel directly impacts the efficiency of the crushing process. A well-designed jaw plate can significantly reduce downtime caused by wear and tear, leading to increased productivity and lower operating costs for mining companies.

The DTH hammer operates through compressed air, which is pumped through a series of valves and chambers within the hammer. When the air pressure builds up, it drives a piston that strikes the drill bit, creating a powerful force that breaks the material. This process continues in rapid succession, allowing the drill bit to penetrate the ground efficiently. The design of the DTH hammer allows for a larger drop height of the piston than traditional rotary drills, resulting in higher impact energy and better drilling performance.