The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.

Die Bedeutung von Sandpumpen

4. 이동성 많은 디젤 압축기는 이동이 용이하도록 설계되어 있습니다. 바퀴가 달려 있어 다양한 작업 현장에 쉽게 이동할 수 있으며, 이는 작업의 유연성을 높이는 데 도움이 됩니다.

Applications in the Mining Industry

(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.

2. Material Composition Spiral drill bit teeth are often made from high-speed steel (HSS), carbide, or cobalt materials, which provide durability and the ability to withstand high levels of heat and pressure. The selection of material plays a crucial role in the bit's ability to maintain sharpness and resiliency over time.

1. Construction Sites Commonly used to power tools like jackhammers, air nailers, and other pneumatic equipment essential for construction projects.