What are Sump Pumps?

The primary advantage of vertical slag pumps is their ability to handle high temperatures and abrasive materials without significant wear and tear. These pumps often integrate advanced materials such as high chromium alloys that enhance durability and extend service life. Moreover, their vertical design minimizes the footprint, making them suitable for installations where space is limited.

Construction projects often involve the handling of slurries, cement, and other abrasive materials. Self-priming slurry pump solutions streamline the pumping process, reducing labor costs and speeding up project timelines. These pumps are versatile, efficient, and essential for construction sites worldwide.

Trong ngành công nghiệp hiện đại, máy nén khí đã trở thành một phần không thể thiếu. Với sự phát triển nhanh chóng của công nghệ, máy nén khí di động diesel đã nổi lên như một giải pháp tuyệt vời cho nhiều ứng dụng khác nhau. Dưới đây là một cái nhìn tổng quan về máy nén khí di động diesel, lợi ích của nó, và một số ứng dụng phổ biến.

Les matériaux utilisés dans les barres de forage

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank