- Construction For foundations, pilings, and site preparation, DTH techniques enable precise hole placement and stability in challenging geological conditions.
The primary function of a drainage pump is to collect and remove water from a specified area. Most commonly used in basements, crawl spaces, and construction sites, these pumps are equipped with a float switch that activates the pump when water reaches a certain level. Once the water is detected, the pump will turn on, drawing the water into its casing and expelling it through a discharge pipe to a designated drainage area. This process continues until the water level drops below the float switch, at which point the pump turns off.
Second, the use and characteristics of the drilling rig:
1). Use:
Engineering anchoring drill can be used in urban construction, railway, highway, river, hydropower and other projects to drill rock anchor hole, anchor hole, blasting hole, grouting hole and other drilling construction.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
The DTH hammer operates through a system of compressed air. High-pressure air is directed down the drill string, powering the hammer at the end of the drill bit. The hammer strikes the bit with considerable force, fracturing the rock immediately beneath it. As the bit penetrates further, the broken rock is then cleared from the hole by the same air stream, allowing for continuous drilling without the interruptions often associated with other drilling methods.
4. Renewable Energy Projects With the rise of offshore wind energy, submarine hammer drilling is increasingly used to install the foundations for wind turbines. The ability to achieve deep penetration in various seabed conditions makes this method invaluable in the renewable energy sector.
Нэмж хэлэхэд, чулуу бутлуурын плита нь засвар үйлчилгээ, солилцооны явцад ихээхэн ач холбогдолтой. Түүний эд анги, гадаад хэлбэр, зураас, элэгдэл зэргээс шалтгаалаад заслын үйл явц ихээхэн урт хугацаа шаарддаг. Иймд, плитаа тогтмол хянах, шаардлагатай үед засвар үйлчилгээ хийх, материалыг шалгах нь чухал юм.
5. Customer Service and Support A supplier’s commitment to customer service does not end with the sale. Efficient after-sales support, including maintenance services, spare parts availability, and technical assistance, is crucial for minimizing downtime and ensuring pumps operate optimally throughout their lifespan.
Advantages of DTH Hammer Drilling
3. Effluent Pumps Specifically intended for the removal of grey water or light solids, effluent pumps can also be effectively utilized for mud evacuation, provided the sediment is not too thick or heavy.
